first commit

代码案例/6 Arduino基础学习/6 Arduino程序 – 程序结构/.pydio

@@ -0,0 +1 @@
+8d37103d-6aea-4fb5-b058-8f29a19b4c2a

代码案例/6 Arduino基础学习/6 Arduino程序 – 程序结构/blink/.pydio

@@ -0,0 +1 @@
+265bb6c1-15dd-496c-8a5a-a9ab7317d348

代码案例/6 Arduino基础学习/6 Arduino程序 – 程序结构/blink/blink.ino

@@ -0,0 +1,46 @@
+/*
+  Blink
+  Turns on an LED on for one second, then off for one second, repeatedly.
+  反复的点亮LED一秒钟，然后关闭LED一秒钟。
+ 
+  Most Arduinos have an on-board LED you can control. On the UNO, MEGA and ZERO 
+  it is attached to digital pin 13, on MKR1000 on pin 6. LED_BUILTIN is set to
+  the correct LED pin independent of which board is used.
+  If you want to know what pin the on-board LED is connected to on your Arduino model, check
+  the Technical Specs of your board  at https://www.arduino.cc/en/Main/Products
+  很多Ａｒｄｕｉｎｏ开发板上带有一个你可以控制的ＬＥＤ． 在UNO, MEGA 和 ZERO型号的开发板上，
+  这个ＬＥＤ连在了引脚１３上。 在MKR1000型号的开发板上，这个ＬＥＤ连在了引脚６上。无论使用哪
+  种型号的开发板，LED_BUILTIN可以代表正确的LED引脚编号。
+   
+  This example code is in the public domain.
+ 
+  modified 8 May 2014
+  by Scott Fitzgerald
+   
+  modified 2 Sep 2016
+  by Arturo Guadalupi
+   
+  modified 8 Sep 2016
+  by Colby Newman
+ 
+  注释中文翻译：太极创客
+  www.taichi-maker.com
+*/
+ 
+ 
+// the setup function runs once when you press reset or power the board
+//当你给开发板通电后或者按下复位按钮后，setup函数运行一次。
+void setup() {
+  // initialize digital pin LED_BUILTIN as an output.
+  // 初始化LED_BUILTIN数字引脚为输出模式
+  pinMode(LED_BUILTIN, OUTPUT);
+}
+ 
+// the loop function runs over and over again forever
+// loop 函数永远会反复的运行
+void loop() {
+  digitalWrite(LED_BUILTIN, HIGH);   // 点亮LED（高电平）turn the LED on (HIGH is the voltage level)
+  delay(1000);                       // 等待1秒 wait for a second
+  digitalWrite(LED_BUILTIN, LOW);    // 将电平设置为低来熄灭LED turn the LED off by making the voltage LOW
+  delay(1000);                       // 等待1秒 wait for a second
+}